PPSU rods and sheets are semi finished engineering plastic products used to manufacture components for demanding operating conditions. Selecting the right stock involves matching the product dimensions and color to the intended application, while confirming availability and customization requirements before ordering.
The listed PPSU rod diameters range from 6 mm to 100 mm, with additional sizes of 150 mm and 200 mm. The diameter tolerance is within +2 mm.
These dimensions provide options for machining components of different sizes. For project specific requirements, check the PPSU Rod specifications and confirm special dimensions with the supplier.
PPSU sheets are listed in a standard format of 1250 × 620 mm, with thicknesses available from as thin as 2 mm and 3 mm up to 100 mm. The appropriate thickness depends on the finished component design, machining allowance, and operating conditions.
For nonstandard dimensions, confirm availability and cutting options before placing an order.
Natural PPSU is typically translucent amber. Colored options are also available, including blue, yellow, red, and black, depending on the product and required specifications.
Color availability may vary by size and product form. Buyers should confirm the requested color and dimensions before ordering.
Colored stock can help distinguish components during assembly and maintenance. For example, the PPSU Rod Blue product page shows a blue PPSU option.
Color does not determine material performance or regulatory suitability. The selected grade should still meet the application's technical requirements.
PPSU rods can be machined into bushings, fittings, and other components that require impact resistance and dimensional stability. The required diameter depends on the finished part dimensions and machining allowance.
PPSU sheets can be machined into plates, supports, covers, and other flat components. Thickness selection should account for component geometry, mechanical loads, and operating conditions.
PPSU offers good resistance to heat, hot water, and hydrolysis. These properties make it suitable for selected components exposed to demanding thermal conditions.
Actual performance depends on the material grade and service environment. For medical or food contact applications, confirm the applicable grade documentation and regulatory requirements before use.
Standard sizes may not meet every project requirement. The supplier offers customization options for semi finished plastic products, including different dimensions, colors, and selected material modifications.
The Customized Service page provides further information about customized rods, sheets, and modified materials.
Standard product dimensions do not guarantee that every size and color is immediately available. Before ordering, confirm current stock, minimum order quantities, production lead times, and any special requirements.
For a quotation, provide the required material grade, dimensions, color, quantity, and intended application.
The diameter tolerance is within +2 mm. Confirm the dimensional requirements with the supplier before ordering.
The listed standard sheet size is 1250 × 620 mm, with thicknesses available from 2 mm and 3 mm up to 100 mm. Other dimensions should be confirmed before ordering.
Yes. Colored options include blue, yellow, red, and black. Availability depends on the product form, dimensions, and material specifications.
No. PPSU has good heat resistance, but suitability depends on the material grade, operating temperature, exposure conditions, and mechanical requirements. Check the relevant technical data before selecting a grade.
PPSU rods and sheets are available in different dimensions and colors for a range of machining requirements. Confirming specifications, stock availability, and customization options helps ensure the material fits your project.
For product details or a quotation, Contact Us to discuss your requirements.
By continuing to use the site you agree to our privacy policy Terms and Conditions.
