Tuntun Plastic
EN
Tuntun Plastic
You are here：

News

News

The Top Manufacturers of PEBA-Ester Materials 2022

In the previous article, we have made a basic introduction to PEBA-Ester material. But if you want to purchase it, where can you get it? Today we will introduce several PEBA-Ester material manufacturers to you.

PAEK Series High Performance Polymers

Polyetheretherketone was the first industrially produced variety. A special engineering plastic with excellent comprehensive properties. It has excellent heat resistance, water resistance, solvent resistance and electrical insulation. Radiation resistance is the best among all plastics.

What is the Nylon 12 Material?

PA12 is also known as polylaurolactam, a semi-crystalline thermoplastic material. PA12 is a good insulating material and will not absorb water. PA12 has a very low melting point and density, has a small specific gravity and is a soft nylon plastic with low shrinkage. Nylon 12 has a good noise damping effect, and can be used for silent gears. The injection temperature of nylon 12 is 240-300 degrees.

What Are the Applications of PPSU?

PPSU has a scientific name as polyphenylene sulfone resins. It is a novel thermoplastic engineering plastic, which refers to a polymer compound containing a sulfone group and an aromatic nucleus in the main chain of the molecule, and it is non-crystalline. PPSU has the properties of high transparency and high hydrolytic stability and can withstand repeated steam sterilization.

What Is PEBA Material?

Polyether block amide or PEBA is a thermoplastic elastomer. PEBA is also known as PA12 Ester (nylon 12 elastomer). PEBA materials are block copolymers prepared from polyether and polyamide blocks.

An Overview of PEEK Plastic

This engineering thermoplastic has great mechanical strength and has been rated high-performing in its semi-crystalline attributes. Its semi-crystalline nature allows for good performance under intense heat, low moisture retention and good resistance to harsh chemicals.

PSU vs PES vs PPSU

Isopropylidene can reduce the intermolecular force, giving the polymer certain flexibility and good melt processability. The non-polar methyl side chain makes the polymer less hygroscopic. The electrical properties are improved, but the heat resistance of the polymer is unfavorable, so that heat distortion temperature and maximum continuous use temperature of PSU are all lower than PPSU and PES.

Basic Introduction of Polyamide

As a large amount of engineering plastics, polyamide is widely used in machinery, automobiles, electrical appliances, textile equipment, chemical equipment, aviation, metallurgy and other fields. It has become an indispensable structural materials in various industries, and its main features are as follows.

What Are Sulfone Polymers And Their Properties?

Heat resistance is the outstanding performance characteristic of the sulfones. Service temperature is limited by heat-deflection temperature, which ranges from 345 to 400°F.

Congratulations on Youju (Our Long-Term Partner) Ninth Anniversary

Congratulations on Youju (our long-term partner) ninth anniversary and the successful completion of the foundation of Youju Jiangmen Headquarters.

Bio-PA12 The Environmentally Friendly Material

PA12-- RodneyⓇ SAM660ECo, the more environmentally friendly material, which containing 49% castor oil extract.
5/5

If you have any interest in our products,
please feel free to contact us & We are ready to serve you!

Quick Links

Products

Industries

Follow Us

Contact

© 2022 DONGGUAN SHENGWEN PLASTIC TRADING CO.LTD. All rights reserved. Site Map Designed by iwonder.cn

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message